Check Coromandel cement price online in Hyderabad today. PPC cement helps to supply additional cohesive concrete and is a smaller amount at risk of segregation & trauma. PPC cement additionally reduces the speed of slump loss of concrete as compared to concrete created with standard cement, notably in hot weather condition. We are the official dealer & supplier of all Coromandel cement products in Hyderabad. Low-cost for 43 grade & 53 grade cement types. We offer the lowest wholesale rate for construction materials from starting from grade cement to TMT steel bars. Coromandel PPC cement price or rate quoted herein is only applicable to the areas covering Hyderabad. Our motto is to serve you with the best with assurance of quality and hassle-free shopping experience. For this very reason, we are the preferred choice among buyers who enjoy exciting deals & discounts every hour on every product. You might also want to check Chettinad PPC Cement, Dalmia PPC Cement, Deccan PPC Cement, KCP PPC Cement, Maha PPC Cement, Nagarjuna PPC Cement & Parasakti PPC Cement.
Advantages:
- Significantly higher long term strength
- Low heat of hydration
- Low water demand
- Higher workability
- Low permeability and porosity
- Resistance to sulphate and chloride attacks
- Reduced bleeding
- Pore refinement leading to improved density of concrete
- Enhanced durability
Applications:
- Residential and commercial buildings
- Industrial structures
- Mass concrete work
- Marine works
- Suitable for wide range of applications including masonry applications
SI.No. | Requirements/Characteristics | Specified value | Test results obtained | |
PHYSICAL REQUIREMENTS | ||||
1 2 | Fineness (By Blaines apparatus) Soundness | Not less than 300 m2/ kg | 350m2/kg | |
a) Le-chatelier method | Not more than 10 mm | 2.0 | ||
b) Autoclave test | Not more than 0.8 % | 0.01 | ||
3 | Setting time | |||
a) Initial setting time in minutes | Not less than 30 | 160 | ||
b) Final setting time in minutes | Not more than 600 | 240 | ||
4 | Compressive strength | |||
a) 72 +/ -1 hour | Not less than 16 Mpa | 24 | ||
b) 168 +/- 2 hours | Not less than 22 Mpa | 34 | ||
c) 672 +/- 4 hours | Not less than 33 Mpa | 48 | ||
5 | Drying shrinkage % | Not more than 0.15 | 0.004 | |
CHEMICAL REQUIREMENTS | ||||
1 | Insoluble residue (% by mass) | Not more than x+4 (100 – x) / 100 | 28 | |
2 | Magnesia (% by mass) | Not more than 6.0 | 1.08 | |
3 | SO3 | Not more than 3.5 | 2.55 | |
4 | Total loss on ignition (% by mass) | Not more than 5.0 | 1.46 | |
5 | Total chloride content (% by mass) | Not more than 0.10 | 0.01 |
Reviews
There are no reviews yet.