Dulux wall putty can be used to prepare surfaces and to make the walls /ceilings ready for painting. It contains finest quality minerals, white cement and polymers. It is suitable for interiors as well as exteriors.
Step 1 : Surface Preparation
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire /stiff coir brush followed by water jetting, if required. Fill up all minor cracks and defects with suitable Dulux Aquatech Crack Fillers
Step 2 : Application process
Apply Dulux Polyputty paste from the bottom in upward direction uniformly with the help of a steel trowel/putty blade to ensure less wastage. Allow at least 3 hours of drying time for the applied polyputty paste. After drying of the first coat rub the surface gently with the putty blade in order to remove loose particles. Apply the second coat after the first coat is fully dried or set. Preferably, leave the surface to dry overnight.
Step 3 : Drying time
Apply the second coat after the first coat is fully dried or set. Preferably, leave the surface to dry overnight.
Health & Safety
Store the container in an upright position, with the lid tightly closed in a cool dry place. Keep out of reach of children and away from food and animal feed. Refer Safety Data Sheet for more details.